TRAINING

Search for Courses

CATEGORIES: Plant / Lifting / Groundworks / Construction / Access

If you wish to request more than one type of training, or if your training is required in the next 7 days, please contact us to discuss your requirements.

Accreditation

Course

Description

CPCS

A98 - Lifting Operations

CPCS

BTC 180 Excavator below 10 Tonne

This course is suitable for potential and existing plant operators who are required to operate or supervise the operation of the Excavator, for those who have received no formal instruction and those wishing to refresh their skills.

ENQUIRE

IPAF

IPAF OPERATOR

Various courses can be achieved within the IPAF framework, for example:- MEWP for Managers (MM), push around verticals(PAV), mobile vertical (3A), mobile boom(3b), static boom (1B), Harness (H), load/unload (LOAD). The course duration is dependant upon the number of applicants and the categories being applied for, usually 1 - 3 days.

ENQUIRE

NPORS

Lifting and Slinging Overhead Crane

 The aim of this course is to assist learners in preparing to carry out lifting operations safely within the work place, preparing and using lifting equipment, and following safe working procedures.

ENQUIRE

NPORS

Safe Working at Height N404

The aim of this course is to assist learners in preparing to carry out Work at Heights, safely, within the work place, preparing and using appropriate personal protective equipment (PPE), using equipment safely, following procedures and dealing with emergencies.

ENQUIRE

CPCS

A97 Excavator 360° below 10 tonnes - Upgrade for Existing Category Holders

Excavator 360° below 10 tonnes - lifting operations upgrade - CPCS Online/Practical Test - for existing category holders only subject to card held achievement date ENQUIRE

CPCS

A95 Slinger Signaller - Upgrade for Existing Category Holders

Slinger Signaller - All Types All Duties - CPCS Online Theory / Practical Test - for existing category holders only subject to card held and achievement date ENQUIRE

CISRS

CISRS Scaffolder Training – Tube & Fitting (Part 2)

This course is for people who have spent a minimum of six months on site since passing the Scaffolding Part 1 course. ENQUIRE

CISRS

CISRS COTS course

The CISRS One Day COTS Course is a requirement for any new CISRS Scaffolding Trainee or Scaffolding Labourer card and for Scaffolding Labourer card renewals . The CISRS card must be applied for within 2 years of taking the COTS course. A CISRS Trainee or Labourer card must be held for at least 6 months before a delegate can attend the Part 1 course. ENQUIRE

ECITB

Level 2 Certificate in Supporting the Installation of Engineering Construction Plant and Systems - Mechanical Fitting

To achieve this qualification, candidates must attain a minimum of 30 credits made up of all 6 of the Mandatory units (30 credits) Unit titles: 1. Contribute to the effective working relationships in engineering construction. 2. Work safely and minimise risk in engineering construction. 3. Identify and deal with hazards and emergencies in the engineering construction work environment. 4. Shape engineering construction mechanical components by material removal using hand tools. 5. Support the assembly of engineering construction mechanical components. 6. Support the positioning and installation of engineering construction mechanical plant and equipment. ENQUIRE

ECITB

NVQ Level 2 Certificate in Supporting Engineering Construction Activities

Introduction into the variety of  skills required for supporting engineering construction activities. ENQUIRE

ECITB

NVQ Level 2 Certificate in Lifting and Positioning Engineering Construction Moving Loads

Covers the competencies required to ensure safe lifting and positioning of engineering constuction moving loads. ENQUIRE

ECITB

NVQ Level 2 Diploma in Supporting the Installation of Engineering Construction Plant and Systems – Pipefitting

Covers the competencies required for the role of pipefitters who support the installation of engineering construction plant and systems. ENQUIRE

ECITB

NVQ Level 3 Diploma in Erecting Engineering Construction Capital Plant Steel Structures

Covers the skills and competencies required for those involved in erecting construction capital plant steel structures. ENQUIRE

ECITB

NVQ Level 3 Diploma Installing Engineering Construction Plant & Systems – Mechanical Fitting

Covers core skills and competencies of those involved with mechanical fitting. ENQUIRE

ECITB

NVQ Level 3 Diploma Maintaining Engineering Construction Plant & Systems – Mechanical

Covers the core skills and competencies to mechanically maintain engineering construction plant and systems. ENQUIRE

ECITB

NVQ Level 3 Diploma Maintaining Engineering Construction Plant & Systems – Instrument & Control

Focuses on Instrument and control for those working in the maintenance of engineering construction and plant systems. ENQUIRE

ECITB

NVQ Level 3 Diploma Installing Engineering Construction Plant & Systems – Small Bore Tubing Assemblies

Covers the skills required for those using small bore tubing assemblies. ENQUIRE

CPCS

A10 Excavator 180 below 5 Tonne

This course is suitable for potential and existing plant operators who are required to operate or supervise the operation of the Excavator, for those who have received no formal instruction and those wishing to refresh their skills. ENQUIRE

In house

Crane Rescue

Experienced operatives familiar with fall arrest techniques. This will provide delegates with the knowledge and practical experience to enable them to rescue a fellow operative suspended by a fall arrest lanyard from a tower crane. ENQUIRE

In house

Work at Height Rescue

The course is for those with experience of working at height who may be required to undertake the rescue of an incapacitated or injured worker who has fallen and is suspended by their fall arrest system. ENQUIRE

In house

Gotcha Rescue

Experienced operatives familiar with fall arrest techniques using Gotcha. This will provide delegates with the knowledge and practical experience to enable them to rescue a fellow operative suspended by a fall arrest lanyard from a tower crane. ENQUIRE

In house

PFPE Inspector

As detailed in the Working at Height Regulations 2005 (Regulation 12 (3), employers have a legal duty to ensure all Fall Protection Personal Protection Equipment is inspected at regular intervals. The Personal Fall Protection Equipment Inspector course is designed to give those responsible the necessary training and instruction on the control, management and examinations of the equipment to ensure it is safe to use and suitable under the manufacturers guidelines during its life span. ENQUIRE

In house

PFPE Inspection Service

As detailed in the Working at Height Regulations 2005 (Regulation 12 (3), employers have a legal duty to ensure all Personal Fall Protection Equipment is inspected at regular intervals. The Personal Fall Protection Equipment Inspector will carry out thorough examinations of all equipment used on-site to ensure it is safe to use and suitable under the manufacturers guidelines for its life span. ENQUIRE

ECITB

Level 3 Diploma in Moving Engineering Construction Loads

To achieve this qualification, candidates must attain a minimum of 62 credits made up from all 7 of the mandatory units (59 credits) plus 1 further unit from the optional units (minimum 3 credits). Unit titles - mandatory units 1. Contribute to effective working relationships in engineering construction. 2. Work safely and minimise risk in engineering construction. 3. Identify and deal with hazards and emergencies in the engineering construction work environment. 4. Prepare loads for moving or lifting and positioning in engineering construction. 5. Move loads in engineering construction. 6. Determine resource requirements to achieve moving lifting and positioning objectives in engineering construction. 7. Lift and position loads in engineering construction. Unit titles - Optional units 1. Determine technical requirements to achieve moving lifting and positioning objectives in engineering construction. 2. Dismantle engineering construction assemblies for movement. 3. Contribute to the organisation of work activities in relation to the movement of loads in engineering construction. 4. Contribute to technical leadership in the movement of loads in engineering construction. ENQUIRE

CPCS

A59 Excavator above 10 tonne

This course is suitable for potential and existing plant operators who are required to operate or supervise the operation of the Excavator, for those who have received no formal instruction and those wishing to refresh their skills. ENQUIRE

Various

Higher Apprenticeship in Quantity Surveying & Commercial Management

The Commercial Apprenticeship Programme will instil all the qualities and skills required as a commercial professional. You will spend five years learning from experts as part of the apprenticeship and, as well as getting valuable real-world experience, you will study for a university level qualification and work towards attaining membership of a professional body. ENQUIRE

Various

Intermediate (Level 2) Apprenticeship In Civil Engineering Construction Operations.

Level 2 Apprenticeship in 'Con Ops' Civil Engineering Construction Operations. Practical apprenticeship in learning the skills and knowledge required to safely conduct general construction operations in a working environment. Assessment in the workplace ENQUIRE

Various

Intermediate (Level 2) Apprenticeship in Water Utilities

Level 2 Apprenticeship in Water Utilities. Practical apprenticeship in a Water Utilities. Assessment in the workplace ENQUIRE

Various

Level 2 Intermediate Apprenticeship in Steel-fixing Occupations Major Projects

Level 2 Apprenticeship in Steel-fixing focussed on major projects. Practical apprenticeship in a real work environment. Assessment in the workplace. ENQUIRE

Various

Level 3 NVQ/Apprenticeship in Civil Engineering for Technicians

This apprenticeship will give you a comprehensive insight into how construction sites operate, with hands-on experience in a variety of different roles ENQUIRE

Various

Level 4 Higher Apprenticeship in Quantity Surveying & Commercial Management

The Commercial Apprenticeship Programme will instil all the qualities and skills required as a commercial professional. You will spend five years learning from experts as part of the Apprenticeship and, as well as getting valuable real-world experience, you will study for a university level qualification and work towards attaining membership of a professional body. ENQUIRE

Various

Level 2 Intermediate Apprenticeship In Civil Engineering Construction Operations.

Level 2 Apprenticeship in 'Con Ops' Civil Engineering Construction Operations. Practical apprenticeship in learning the skills and knowledge required to safely conduct general construction operations in a working environment. Assessment in the workplace ENQUIRE

Various

Level 2 Intermediate Apprenticeship in Water Utilities

Level 2 Apprenticeship in Water Utilities. Practical apprenticeship in a Water Utilities. Assessment in the workplace ENQUIRE

Various

Level 2 Intermediate Apprenticeship in Steel-fixing Occupations Major Projects

Level 2 Apprenticeship in Steel-fixing focussed on major projects. Practical apprenticeship in a real work environment. Assessment in the workplace. ENQUIRE

CISRS

Scaffolder Training - Tube & Fitting (Part 2)

This course is for people who have spent a minimum of six months on site since passing the Scaffolding Part 1 course. ENQUIRE

CISRS

Scaffolder Training - Tube & Fitting (Part 1)

This course teaches and reinforces the core skills of scaffolding, including how to safely erect, alter and dismantle basic structures. ENQUIRE

Various

Rigging and Lifting Loads at Height

This is an advanced course combining safe lifting skills with safe work at heights with personal fall protection equipment.  ENQUIRE

Various

Scaffolding Inspection

To understand the principles of tube fittingscaffolding structures and their components in order to aid site inspections and the identification of faults and hazards. ENQUIRE

Various

Advanced Industrial Climber

Enables delegates to carry out pre-use checks and set up temporary access systems on masts, towers and similar structures, as well as climb using double legged full arrest lanyards. They will also be able to safely positionn themselves to work in these environments. Delegates will review the requirements for emergency planning and carry out excavations and rescues of suspended casualties using a nominated rescue kit. ENQUIRE

Various

Rescue from Height

Course is designed to enable operatives to use a specified rescue kit in a variety of locations and to rescue and recover a casualty who has fallen. ENQUIRE

Various

Occasional Industrial Climber

Course for those who intend to access towers, masts or similar structures using pre-installed fall arrest systems and work positioning techniques. ENQUIRE

Various

Management of Work at Height with Harnesses

Suitable for those who oversee, supervise or manage a workforce where there is a requirement to work at height. ENQUIRE

Various

Harness - Rooftop Safety / Work Restraint

Delegates will be able to carry out pre-use checks and use pre-installed access systems. They will also have the knowledge to setup work restraint systems for fall prevention using a variety of different techniques and equipment. ENQUIRE

Various

Practical Use of Personal Fall Protection Equipment.

Teaches you to be able to safely install and use your own personal fall arrest equipment. ENQUIRE

Various

Harness - Height Safety Equipment Appreciation and Inspection

This course is designed to give an operative a good understanding of the principles for using Personal Fall Protection Equipment. ENQUIRE

PASMA

PASMA - Towers on Stairs

Provides delegates with the knowledge to safely assemble, dismantle and relocate towers on stairs without risk of personal injury to yourself or others. Delegates must hold a current PASMA 'Towers for Users' Photo Card and have a good working knowledge of working at height.

ENQUIRE

PASMA

Working at Height - Essentials

Enables an individual to effectively comply with their duties under the Work at Height Regulations. ENQUIRE

PASMA

PASMA Towers for Managers

This course enables delegates to be able to properly plan and organise that those involved in carrying out work under their supervision are competent, properly trained, plus ensure towers are correctly inspected and maintained. ENQUIRE

PASMA

PASMA Mobile Access Tower - Low Level Access

This course enabes the delegate to assemble, dismantle, use, move and inspect prefabricated low level access units to a nationally recognised standard. ENQUIRE

PASMA

PASMA Mobile Access Tower for Users

Gain an understanding of current relevant legislation and be able to dismantle, erect and inspect mobile access towers safely, as per the manufacturer's instructions. ENQUIRE

Ladder

The Ladder Association -Steps and Stools

This course will enable you to assess and determine when it is appropriate to use stepladders & step stools, correctly locate and safely use stepladders & step stools and visually inspect for damage before and after use. ENQUIRE

Ladder / In house

The Ladder Association - Inspection of Steps and Ladders

Gain an understanding of current relevant legislation, be able to throughly inspect ladders and stepladders identifying safety critical faults and record equipment details and inspections as outlined by PUWER. ENQUIRE

IPAF

IPAF PAV Operator

This course enables delegates to become competent in the operation of various types of PAV platforms safely. Learning skills such as pre-inspection and the correct operation of equipment will help avoid potential accidents. ENQUIRE

Ladder

The Ladder Association - Steps and Ladders

Learn how to assess and determine the appropriate use of ladders and steps, select appropriate work at height equipment for a task, correctly locate and safely use ladders and steps as well as inspecting ladders and steps for damage. ENQUIRE

IPAF

IPAF MEWPs for Managers

This course develops the delegate's awareness of current legislation, types and classifications of MEWPs. Delegates will be aware of correct machine election, correct PPE selection, safe-use and operation of MEWPs, planning and maintenance. ENQUIRE

IPAF

IPAF MEWPs Safety Harness

This course enables IPAF MEWPs Safety Harness operators to identify and select the correct form of safety harness and lanyard, then be able to inspect, maintain, monitor, fit and use them correctly. ENQUIRE

IPAF

IPAF MEWPs for Operators

Provides delegates with the essential knowledge and skills required for safe and efficient operation of MEWPs. Successful completition of the course will result in an IPAF Certificate and a PAL Card being awarded. ENQUIRE

C&G

Confined Space - Emergency Rescue and Recovery

This course provides delegates with the knowledge and skills required to work within and emergency rescue and recovery team. ENQUIRE

C&G

Confined Space - Topman / Person High Risk

Provides necessary knowledge and skills required for a Topman/Person in a high risk confined space environment. ENQUIRE

C&G

Confined spaces 6150-03 - High Risk

This course is about working in confined spaces which have non-standard entries and which, in consequence, makes rescue difficult. It is likely that a hazard will be present at sometime during entry. ENQUIRE

C&G

Confined Spaces 6150-02 - Medium Risk

This course designed for people that need to enter confined spaces and hazardous areas with an in-depth understanding of the requirements of the law, associated legislation, safe systems of work and risk assessments. The course focuses on competent use of confined space equipment and practical assessments. ENQUIRE

C&G / In house

Confined Space Low Risk

Provides delegates with the knowledge and sjills to work safely wihin a confined space environment defined as low risk. ENQUIRE

Various

Abrasive Wheels 1 day course

This course introduces the learner to the theoretical and practical safe use of abrasive wheels for use on non-precision machines such as bench grinding and angle grinding machines. ENQUIRE

Various

Abrasive Wheels 1/2 Day (Type 41,42 &27)

This course introduces the learner to the theoretical and practical safe use of abrasive wheels for use on non-precision machines such as bench grinding and angle grinding machines. ENQUIRE

C&G

NVQ Level 2/3 in Trowel Occupations

A Level 2 or 3 NVQ Diploma in Trowel Occupations is official recognition of the knowledge and skills needed to work in this area of the construction field. ENQUIRE

Various

HNC in Construction

This HNC is designed for those who are already working in, or aspiring to work in, the construction industry in a range of roles The programme has been designed to provide students with a wide breadth of knowledge in order to prepare them for the multi-disciplined elements of working in this industry. ENQUIRE

Various

Foundation Degree in Construction

The course is designed for those who are already working in, or aspiring to work in, the construction industry in a range of roles. ENQUIRE

Various

HNC in Civil Engineering

This HNC is designed for those who are already working in the civil engineering industry in a range of roles including Trainee Site Engineers or Quantity Surveyors. ENQUIRE

Various

Foundation Degree in Civil Engineering

Successful completion of this course may lead to membership of professional bodies such as the Institution of Civil Engineers. ENQUIRE

Various

NVQ Level 2 Steel Fixing Operations

As a steel fixing apprentice, you’ll learn specialist construction skills to enable you to work in the steel fixing industry. ENQUIRE

Various

NVQ Level 3 Formwork

NVQs in Formwork are usually completed in the workplace, and demonstrate competency against the National Occupational Standards. The Level 3 Formwork NVQ is for learners who wish to specialise in the discipline of formwork and joinery. ENQUIRE

Various

NVQ Level 2 Formwork

NVQs in Formwork are usually completed in the workplace, and demonstrate competency against the National Occupational Standards. The Level 2 Formwork NVQ is for learners who wish to specialise in the discipline of formwork and joinery. ENQUIRE

Various

NVQ Level 2 Controlling Lifting Operations

This qualification is ideal for individuals who specialise in slinging and signalling activities to carry out and control lifting operations.  It provides an opportunity for them to demonstrate their competence in this area and gain a Level 2 NVQ Diploma in Controlling Lifting Operations.   ENQUIRE

Various

NVQ Level 2 Construction Operations and Civil Engineering Services.

With Level 2 NVQs in Construction Operations and Civil Engineering Services, you can improve your construction skills and site competence.

ENQUIRE

Various

NVQ Level 2 Construction Operations

A Level 2 NVQ Diploma in Construction Operations is official recognition of the knowledge and skills needed to work in this area of the construction field. This qualification is aimed at learners aged 16 and above who work or want to work in the construction industry and specialise in the area of construction operations. ENQUIRE

Various

NVQ Level 2 Plant Operations

The Level 2 NVQ Certificate in Plant Operation qualification has been developed for delivery in a working environment; this means you need to be employed to study this qualification. It has been designed to develop and recognise your skills, knowledge and competence so that you can work in the construction industry or progress onto further learning. ENQUIRE

EUSR

EUSR Excavation Safety

This course introduces the learner to the theoretical and practical dangers of excavation work. ENQUIRE

CPCS

A97 Excavator 360° below 10 tonnes - lifting operations upgrade

CPCS Online/Practical Test - for existing category holders only subject to card held achievement date ENQUIRE

RTITB / ITSSAR

Lift Truck Operator

This course provides delegates with the knowledge, instruction and practical skills necessary for the safe operation of a lift truck. ENQUIRE

CPCS

A56 Articulated Chassis Dump Truck

This course is suitable for potential and existing plant operators who are required to operate or supervise the operation of the Articulated Chassis Dump Truck, for those who have received no formal instruction and those wishing to refresh their skills.  ENQUIRE

CPCS

A73 Plant & Vehicle Marshaller

This course is suitable for those who have responsibilities of a Plant and Vehicle Marshaller; how to prepare for vehicle movement and guidance, communication, plant hazards and ground condition, work area layout and positioning as part of a work management traffic plan.  ENQUIRE

CPCS

A66 Compact Crane

This course is suitable for potential and existing plant operators who are required to operate or supervise the operation of the Compact Crane, for those who have received no formal instruction and those wishing to refresh their skills.  ENQUIRE

CPCS

A62 Crane Lift Supervisor

This course is suitable for supervisors and managers with responsibility for supervising lifting operations. You should have sufficient experience of cranes to meet the requirements specified in British standard 7121 Safe Use of Cranes. ENQUIRE

CPCS

A61 Appointed Person

This course is suitable for supervisors and managers with responsibility for lifting operations and sufficient experience of cranes to meet the requirements specified in British standard 7121 Safe Use of Cranes.  ENQUIRE

CPCS

A59 Excavator above 10 tonne

This course is suitable for potential and existing plant operators who are required to operate or supervise the operation of the Excavator, for those who have received no formal instruction and those wishing to refresh their skills.  ENQUIRE

CPCS

A58 Excavator below 10 tonne

This course is suitable for potential and existing plant operators who are required to operate or supervise the operation of the Excavator, for those who have received no formal instruction and those wishing to refresh their skills. ENQUIRE

CPCS

A40 Slinger Signaller

This course is suitable for potential and existing plant operators who are required to operate or supervise the operation of the Slinger Singaller, for those who have received no formal instruction and those wishing to refresh their skills.  ENQUIRE

CPCS

A36 Lorry Loader

This course is suitable for potential and existing plant operators who are required to operate or supervise the operation of the Lorry Loader, for those who have received no formal instruction and those wishing to refresh their skills.  ENQUIRE

CPCS

A33 Agricultural Tractor

This course is suitable for potential and existing plant operators who are required to operate or supervise the operation of the Agricultural Tractor, for those who have received no formal instruction and those wishing to refresh their skills.  ENQUIRE

CPCS

A31 Ride on Roller

This course is suitable for potential and existing plant operators who are required to operate or supervise the operation of the Ride on Roller, for those who have received no formal instruction and those wishing to refresh their skills.  ENQUIRE

CPCS

A23 Skid Steer Loader

This course is suitable for potential and existing plant operators who are required to operate or supervise the operation of the Skid Steer Loader, for those who have received no formal instruction and those wishing to refresh their skills. ENQUIRE

CPCS

A17 Telehandler

This course is suitable for potential and existing plant operators who are required to operate or supervise the operation of the Telehandler, for those who have received no formal instruction and those wishing to refresh their skills. ENQUIRE

CPCS

A12 Excavator 180 above 5 Tonne

CPCS This course is suitable for potential and existing plant operators who are required to operate or supervise the operation of the Excavator, for those who have received no formal instruction and those wishing to refresh their skills. ENQUIRE

CPCS

A10 Excavator 180 below 5 Tonne

This course is suitable for potential and existing plant operators who are required to operate or supervise the operation of the Excavator, for those who have received no formal instruction and those wishing to refresh their skills. ENQUIRE

CPCS

A16 Industrial Forklift

This course is suitable for potential and existing plant operators who are required to operate or supervise the operation of the Industrial Forklift, for those who have received no formal instruction and those wishing to refresh their skills.  ENQUIRE

CPCS

A09 Forward Tipping Dumper

CPCS This course is suitable for potential and existing plant operators who are required to operate or supervise the operation of the Forward Tipping dumper, for those who have received no formal instruction and those wishing to refresh their skills.  ENQUIRE

ILM

Level 3 NVQ Diploma in Occupational Work Supervision

This qualification is intended for construction site supervisors who are looking to achieve an NVQ qualification.  There are 7 units & competence is assessed in the workplace. 

ENQUIRE